Updated November 2026

Baby proofing an entertainment center comes down to three jobs: anchoring the unit so it cannot tip, hiding or securing the cords and outlets behind it, and locking the cabinets and drawers where toddlers find small or dangerous items. Most of the work takes under an hour and needs only basic hardware. This guide walks through each step in the order that matters most.

Anchor the Unit to the Wall First

A toddler who pulls up on a shelf or climbs the lower doors can bring a heavy media stand down on top of them. Anchoring is the single most important step. Use a furniture anchor kit with a strap or cable that connects the top back of the cabinet to a wall stud. Drill into the stud, not drywall alone, and check the manufacturer’s weight rating before you buy. If the unit has a flat back, a corner bracket or L-bracket can work as a second point of attachment. For more detail on choosing hardware, see Where to Buy Furniture Anchors: 5 Best Picks for Baby Proofing (2026).

Shopping for one? See our guide: Baby Proofing Service Houston: 7 Best Options Compared (2026).

Secure the Cords and Outlets Behind the Stand

Entertainment centers collect cords: TV power, cable boxes, game consoles, soundbars. Toddlers chew on them and pull at them, which can yank a television or console off the surface. Gather cords with cable ties or a cord channel, then run them along the back of the unit rather than dangling down the front. Plug any unused outlets with sliding covers or outlet plugs, and consider a power strip with a switch placed out of reach. For more on the outlet side, read Plug Covers Baby Proofing: A Step-by-Step Guide for Every Room.

Lock the Cabinets and Drawers

Media cabinets often hold remote controls, batteries, game cases, and small electronics. Batteries, especially button cells, are a serious ingestion hazard. Install magnetic or adhesive latches on every door and drawer, and test each one by pulling firmly from the handle. Make sure the lock engages fully. If a drawer has a finger gap, check that a child’s fingers cannot get pinched when it closes. The steps for drawers are covered in Drawer Locks Baby Proofing: 6 Steps to Secure Every Drawer.

Check the Edges, Corners, and Glass

Many entertainment centers have sharp corners at the top and front, and some have glass doors or shelves. Pad hard corners with soft corner guards, and replace glass doors with acrylic or add safety film if you can. Look especially at the height of the top edge, since a toddler who stands on the sofa can reach it. For a full set of edge-softening steps, see DIY Baby Proofing Sharp Corners: 6 Steps to Soften Every Edge.

Quick Checklist

  1. Locate a wall stud and mark it.
  2. Attach the furniture anchor strap from the unit’s top back to the stud.
  3. Bundle all cords and route them along the back.
  4. Cover or plug every outlet in the area.
  5. Install latches on all cabinet doors and drawers.
  6. Pad sharp corners and replace or film any glass.
  7. Pull each door and drawer to confirm the latch holds.
  8. Check the unit by pushing it firmly from the top to test stability.

Common Mistakes

  • Anchoring into drywall alone, which can pull out under load.
  • Leaving a TV cord hanging within reach of a standing toddler.
  • Using a single latch on a double door, leaving one side open.
  • Forgetting the cabinet interior, where remotes and batteries collect.
  • Assuming a heavy TV is safe because the stand looks solid.
  • Furniture anchor kit: Straps or cables that tie the top of the unit to the wall are the most reliable way to stop tip-overs. View on Amazon
  • Magnetic cabinet latches: These work without drilling and suit media cabinets with thin doors. View on Amazon
  • Cord organizer or cable ties: Keeping cords bundled and routed out of reach reduces pulling and chewing. View on Amazon

FAQ

Do I need to anchor an entertainment center if the TV is mounted on the wall?

Yes. A wall-mounted TV does not secure the cabinet below it, and toddlers still climb the doors and drawers. Anchor the stand separately.

What is the best way to hide cords behind an entertainment center?

Use a cord channel or cable ties to bundle them, then run the bundle along the back of the unit and secure it to the wall where possible.

Can I baby proof a glass-door media cabinet?

Yes. Add safety film to the glass, use a latch that holds the doors closed, and anchor the unit. If the glass is cracked or loose, replace it before you proof the rest.

Conclusion

Anchoring the unit, managing cords, and locking cabinets cover most of the risk around an entertainment center. Work through the checklist in order and test each step by pushing, pulling, and tugging. If you are unsure about wall anchoring or electrical work, consult a qualified installer or electrician.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our childproofing guides, checking product details against manufacturer specifications and owner feedback.