Updated November 2026

Baby proofing the TV area means fixing three main risks: the TV tipping onto a child, cords that can be pulled or chewed, and small objects or sharp corners within reach. This guide walks you through a practical audit so you can anchor the TV, tame the cords and rearrange the space in one afternoon.

Step 1: Anchor the TV to the wall

Tip-overs are the most serious TV hazard for toddlers, since toddlers often climb on furniture and grab the screen or stand. Most TV manufacturers specify using the anchor kit included with the mount or stand, and many recommend anchoring any unit that is not wall-mounted. Use a stud finder, attach the wall strap or anchor to a stud where possible, and keep the strap taut without over-tightening. If you are unsure about wall type or weight rating, consult a professional installer.

Shopping for one? See our guide: 5 Best Buy Buy Baby Child Proofing Products for Cabinets and Drawers (2026).

Step 2: Secure the TV stand or console

A TV stand can tip even when the TV itself is secured. Check the manufacturer’s instructions for anchoring hardware and fasten the furniture to the wall using furniture anchors at the top rear. If you are working with a popular flat-pack unit, the steps differ slightly, so Baby Proofing TV Stand: Step-by-Step Guide to Anchoring and Safer Setup covers the process in more detail.

Step 3: Manage every TV and device cord

Cords are a strangulation and pull-down hazard, and toddlers are drawn to dangling wires. Route cables behind the stand or inside a cord raceway, and cinch up any slack with ties. Avoid running cords along the floor where a child can grab them, and check the rear of the TV for loose plugs. For a full cord checklist, see Baby Proofing TV Cords: 6 Steps to Keep Toddlers Safe (2026).

Step 4: Cover outlets and power strips near the TV

Many TV areas have a power strip and a few outlets clustered together. Use outlet covers or sliding plug covers on unused sockets, and keep the power strip mounted off the floor. Make sure the strip is not hidden behind the stand where heat can build up.

Step 5: Clear the area of hazards

Look at what sits in reach of a standing toddler. Move remote controls, game consoles, small decorative items and magnets to a higher shelf or closed cabinet. Check the corners of the stand, coffee tables and nearby shelving for sharp edges, and add corner guards where needed.

Step 6: Set up a safe seating and play layout

  • Keep sofas and chairs at least a few feet from the TV so children do not climb toward the screen.
  • Place a baby gate at the entrance if the TV area is in a room you want to restrict.
  • Avoid putting a play mat or toy bin directly in front of the stand, which can encourage climbing.

Step 7: Recheck everything every few months

Anchors loosen, cords get moved, and toddlers learn new ways to climb. Run through the audit every few months and after any furniture change. Tighten straps, replace frayed cords and confirm that no new objects have crept into reach.

Common mistakes

  • Anchoring the TV but not the stand it sits on.
  • Using a single short strap that leaves slack for a child to pull.
  • Leaving the power strip on the floor within reach.
  • Assuming a wall-mounted TV needs no further checks; mounts can loosen over time.
  • Forgetting that grandparents’ or visitors’ devices may bring new cords into the room.
  • Furniture anchor kits help secure a TV stand or dresser to the wall, which is the main defense against tip-overs. View on Amazon
  • Cord organizers and cable raceways keep wires hidden and out of a child’s reach. View on Amazon
  • Outlet covers and sliding plug covers block unused sockets near the TV. View on Amazon

FAQ

Do I need to anchor a flat-screen TV if it is wall-mounted?

Yes, you should still check the mount’s hardware and confirm it is rated for your TV’s weight. Wall mounts can loosen over time, so inspect them periodically.

Are cord covers enough to keep toddlers safe?

Cord covers help, but they do not stop a child from pulling a plug. Combine them with routing cords out of reach and securing slack.

How often should I check the TV area?

Check every few months and after any change in furniture or devices. A quick visual check of anchors, cords and floor-level objects takes only a few minutes.

Conclusion

A safe TV area comes down to anchoring the TV and stand, managing cords, covering outlets and keeping small or sharp items out of reach. Work through the steps above once, then repeat the audit regularly. If your setup involves heavy or built-in furniture, a professional installer can confirm the best approach.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our childproofing guides, checking product details against manufacturer specifications and owner feedback.