Updated November 2026

Baby proofing a rental house comes down to one goal: make every room safer for a toddler while leaving the walls, floors and fixtures exactly as you found them. You can do most of this with removable gates, pressure-mounted products and tension-based devices. This guide walks through the priorities and the order to tackle them, so you can protect your child without risking your security deposit.

Start With a Landlord-Friendly Plan

Before you buy anything, read your lease for language about alterations, and send your landlord a short written request for any change that involves tools. Many landlords are fine with pressure-mounted gates or anchor straps, but they want to know first. Keep a record of what you install and photograph each room before you start, so you can show the original condition at move-out.

Shopping for one? See our guide: Top 3 Baby Proofing House Kits for Toddler Homes (2026).

Room-by-Room Priorities

Kitchen and Living Room

Focus on the stove, cabinets and furniture. Use a freestanding stove guard or range knob covers, and add magnetic or tension-style cabinet locks on any cabinet that holds cleaners or knives. Anchor tall furniture with straps that screw into studs or use a removable adhesive option, and check that your landlord approves any screws.

Bathroom

Never leave a toddler unattended near water. Use a toilet lid lock, keep medications and razors in a locked cabinet, and set the water heater to 120°F or lower to reduce scald risk. Ask your landlord whether the water heater can be adjusted before you change the setting.

Bedrooms and Stairs

Move cords from blinds away from the crib or bed and use cordless blinds where possible. Install a pressure-mounted gate at the top of stairs and a hardware-mounted gate at the bottom only if your landlord approves drilling. Check that crib slats are no more than 2⅜ inches apart, as the Consumer Product Safety Commission specifies.

Checklist for Renters

  1. Read the lease and get written approval for any installation that involves tools.
  2. Photograph every room, including walls and floors, before you start.
  3. Install a stove guard and cabinet locks in the kitchen.
  4. Add a toilet lid lock and move medications to a locked location.
  5. Set the water heater to 120°F or lower, if your landlord allows it.
  6. Anchor tall furniture with removable straps or approved anchors.
  7. Replace corded blinds with cordless versions or secure the cords.
  8. Mount pressure gates at stairs and check them weekly.
  9. Cover outlets with tamper-resistant covers that do not require drilling.
  10. Keep a list of everything installed so you can remove it at move-out.

Common Mistakes to Avoid

  • Using pressure gates at the top of stairs without checking they are rated for that use, since some are only meant for doorways.
  • Painting over or patching holes without asking, which can cost more than a deposit.
  • Assuming an adhesive hook will hold a heavy dresser; check weight limits before you rely on it.
  • Leaving the gate or lock in place after your child outgrows it, which can create a new hazard.
  • Skipping the photo record, which makes it hard to prove the original condition.

Pressure-mounted gates suit most rental doorways because they install without drilling into walls. Pressure-mounted baby gate View on Amazon is a useful starting point for rooms you need to close off.

Cabinet locks that use adhesive or tension rather than screws let you secure cabinets without marking the cabinet faces. View on Amazon fits this need well in most kitchens.

Furniture straps with removable mounting hardware help secure dressers and bookcases that could tip. View on Amazon is a common choice for renters who need an option that avoids large holes.

FAQ

Can I baby proof a rental without damaging the walls?

Yes. Pressure-mounted gates, tension rods, removable cabinet locks and adhesive-based furniture straps all avoid drilling. Check weight ratings before you rely on any adhesive product.

Do I need my landlord’s permission to install safety devices?

For anything that requires screws, drilling or changes to fixtures, yes, you should ask first and get it in writing. Removable items that do not touch the structure usually need no approval, but check your lease to be sure.

What should I do with installed items when I move out?

Remove everything, patch any small holes if your lease requires it, and compare the rooms to your move-in photos. Keep the photos and any written approvals with your lease records.

Conclusion

Baby proofing a rental house is mostly about choosing removable, landlord-approved options and working through each room in order of risk. Start with the kitchen, bathroom and stairs, and document everything as you go. For hazards involving electrical work, gas appliances or structural changes, consult a licensed professional before proceeding.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our childproofing guides, checking product details against manufacturer specifications and owner feedback.