Updated November 2026

Baby proofing must haves fall into a handful of categories: barriers that block access to stairs and rooms, locks that keep little hands out of cabinets, covers for electrical outlets, anchors that stop furniture from tipping, and water and bathroom safeguards. This guide walks you through what to buy first, where each item belongs, and how to check that everything is working once it is installed.

Start With Stair and Room Barriers

Falls are among the most common injuries for toddlers who are newly mobile, so gates come first. Install a hardware-mounted pressure gate at the top of every staircase, and use a hardware-mounted gate at the bottom only if you have no other option, since pressure gates can be pushed over by a determined climber. Measure the opening width before you shop, and check that the gate’s maximum width covers it with some margin.

Shopping for one? See our guide: Baby Proofing Service Houston: 7 Best Options Compared (2026).

Gates also help you close off rooms that are hard to childproof, such as a home office or a laundry room. For a broader view of where barriers fit, the guide Safety Proofing Home for Baby Checklist: 12 Room-by-Room Steps lays out the order to work through a house.

Lock Up Cabinets, Drawers and Sliding Doors

Cabinets under the kitchen and bathroom sinks usually hold cleaning products, medications and sharp tools, so they need locks before anything else in those rooms. Magnetic or adhesive latches work on most standard cabinets. Sliding glass and closet doors need their own solution, because a standard latch will not stop them from opening.

If you are unsure which lock suits a given cabinet, Hacks for Baby Proofing Cabinets: 7 Practical Tricks That Work (2026) covers the options for different cabinet styles. For sliding doors specifically, see Sliding Door Locks for Baby Proofing: A Step-by-Step Guide (2026).

Cover Outlets and Secure Cords

Outlet covers are inexpensive and quick to install, and they are worth putting on every unused receptacle at toddler height. Choose covers that require a tool or a two-step action to remove, not simple plastic plugs that a child can pull out. Keep cords for blinds, lamps and electronics out of reach, and tuck extension cords behind furniture where they cannot be chewed or tugged.

For a step-by-step look at outlets across the house, read Plug Covers Baby Proofing: A Step-by-Step Guide for Every Room.

Anchor Furniture and TVs

Dressers, bookcases and televisions are a leading cause of serious tip-over injuries. Anchor every tall piece of furniture to the wall with the brackets and straps the manufacturer supplies, or with the anchors recommended for your wall type. Drywall alone will not hold much weight, so locate wall studs with a stud finder and fasten into them where possible.

Anchor kits are sold separately, and the guide Where to Buy Furniture Anchors: 5 Best Picks for Baby Proofing (2026) compares the main sources.

  • Pressure-mounted and hardware-mounted safety gates: Both types are useful, and each suits different spots in the home. View on Amazon
  • Cabinet and drawer latches: Adhesive or magnetic latches protect cabinets without drilling. View on Amazon
  • Furniture anchor straps: Wall straps keep dressers and bookcases from tipping forward. View on Amazon

Common Mistakes

  • Installing a pressure-mounted gate at the top of the stairs, where it can be dislodged by a child pushing against it.
  • Leaving low cabinets unlocked because the most dangerous items seem to be in the bathroom or kitchen.
  • Using outlet covers that a child can pull out with little effort.
  • Assuming furniture is safe because it is heavy, without anchoring it to a stud.
  • Waiting until the child is already crawling to start. Proof the home before the first mobile stage.

FAQ

Which baby proofing must haves should I buy first?

Start with stair gates, cabinet latches and furniture anchors, since these address the most serious injury risks. Outlet covers and window guards can follow within the first few weeks.

Can I rent a home and still baby proof it?

Yes, though you should avoid drilling into walls without permission. Use pressure-mounted gates, adhesive latches and freestanding furniture straps where permitted, and check your lease first.

How often should I check baby proofing items?

Check them monthly, and after any major change such as a new piece of furniture or a child who learns to climb. Loose anchors, worn latches and damaged covers should be replaced promptly.

Conclusion

The core baby proofing must haves are gates, cabinet locks, outlet covers and furniture anchors, and most homes can be covered in a single weekend. Work room by room, test each item after installation, and recheck the setup as your child grows. For health or injury concerns, consult your pediatrician or a qualified childproofing professional.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our childproofing guides, checking product details against manufacturer specifications and owner feedback.