Updated November 2026
Maisi baby proofing safety locks are magnetic latches that fit inside cabinet and drawer frames and keep toddlers out of storage areas without drilling into finished wood. This guide walks through choosing the right lock for each door, installing it correctly, and testing it so a determined toddler can’t defeat it. Expect a process that takes about 20 to 30 minutes per cabinet once you have the right tools on hand.
Check Which Cabinets Need Maisi Baby Proofing Locks
Start with a walk-through of the kitchen and bathroom and mark every door or drawer that holds something a toddler shouldn’t reach, such as cleaning products, medicine, knives, or small items that could be swallowed. Open each one and check the mounting surface. Magnetic locks need a flat, solid inner panel and enough clearance for the catch to sit flush. A few hinged doors with a deep recess or a thin face-frame may need a different style of lock, so note those separately. For a fuller room-by-room list, see Safety Proofing Home for Baby Checklist: 12 Room-by-Room Steps.
Shopping for one? See our guide: 5 Best Toilet Locks for Baby Proofing: 5 Compared for Toddler Homes (2026).
Install the Magnetic Catch and Strike
Most magnetic locks use two pieces: a plate that mounts on the inside of the cabinet frame and a small magnet that sits on the door. Follow these steps for each cabinet:
- Close the door fully and mark the spot on the frame where the door edge lands.
- Mount the catch plate on the frame at that mark, using the included adhesive or screws. Adhesive needs a clean, dry surface and time to cure, so let it sit before testing.
- Attach the magnet to the door at the matching height, so the two pieces line up when the door closes.
- Open and close the door several times to check alignment. The lock should engage with a firm click and release only when you pull the magnet away.
Manufacturers often specify a minimum surface thickness and a maximum gap between door and frame. If the gap is too wide, the magnet won’t hold, so adjust the strike plate before you finish.
Test the Lock Like a Toddler Would
A lock that works once is not the same as one that stays closed under pressure. Pull the door sharply, push at the edge, and try to lift the handle while the lock is engaged. Check that the catch doesn’t loosen after a few days of use. Recheck every lock once a month, especially adhesive mounts in humid rooms such as bathrooms.
Recommended gear
- Maisi magnetic cabinet locks are designed for this exact use and include the catch and magnet pairs you need. View on Amazon
- A small drill and driver set helps if the included screws need a pilot hole in hardwood or thick MDF. View on Amazon
- A level and tape measure keeps both catch plates at the same height across a row of cabinets. View on Amazon
Common mistakes
- Mounting the magnet on the outside of the door, where a toddler can see and remove it.
- Skipping the pull test, which leaves gaps a toddler can exploit.
- Using adhesive on painted or oily surfaces, where it peels within weeks.
- Installing one lock per drawer when two drawers share a frame and need coordinated placement.
- Assuming a lock is permanent and not rechecking it after cleaning or moving furniture.
FAQ
Do maisi baby proofing safety locks damage cabinets?
Adhesive mounts leave residue when removed, and screw mounts leave small holes. Test on an inconspicuous interior spot first, and consider painter’s tape as a temporary mock-up before committing.
Can a toddler open a magnetic lock?
A properly aligned lock is hard for most toddlers to open, but no lock is fully child-proof. Check each one monthly and keep dangerous items out of reach regardless.
Are magnetic locks safe near electronics?
Small magnets should stay away from pacemakers and sensitive electronics, so keep them out of the way of devices and never place magnets where a child could swallow one. If you have a medical implant, consult your doctor before installing magnetic hardware in your home.
Conclusion
Maisi baby proofing safety locks give you a clean, reversible way to secure cabinets that hold hazards. Map every door first, install each catch with careful alignment, and test each one with a firm pull. Recheck them monthly and your storage stays secure as your toddler grows.
Related reading
- Baby Proofing Magnetic Cabinet Locks Maisi: Install Steps and Checklist (2026)
- Sliding Door Locks for Baby Proofing: A Step-by-Step Guide (2026)
- Drawer Locks Baby Proofing: 6 Steps to Secure Every Drawer
- Bumble Baby Child Proofing: A Room-by-Room Safety Guide (2026)
- Baby Proofing Round Table: Corner Guards and Edge Safety Steps (2026)
