Updated November 2026
Cabinet door cam locks are small plastic or metal fasteners that sit inside a cabinet and hold two doors, or a door and its frame, together. When you turn the key or lever, a cam rotates and locks the door in place. This guide explains how cam locks work, how to match them to your cabinets, and how to install them correctly so a curious toddler can’t pull the doors open.
How Cabinet Door Cam Locks Work
A cam lock has a round or oval head on a rod. The head sits in a bore drilled into the cabinet, and a bracket or strike plate on the adjacent surface catches it. Turning the key rotates the cam so its wider edge slides behind the strike and pulls the door tight. Because the locking action is inside the cabinet, there is nothing for a child to grab from the outside.
Shopping for one? See our guide: 5 Best Locks for Cabinet Doors for Toddler-Proofed Homes (2026).
Cam locks are often sold as keyed or keyless versions. Keyed locks give you control and are a practical choice for cabinets holding cleaning products. Keyless or push-to-lock versions are less secure for older children but can work for cabinets a toddler is not yet tall enough to reach.
Choosing the Right Cam Lock for Your Cabinets
Before you buy, measure the thickness of your cabinet door and the diameter of the bore hole you will need. Most manufacturers specify a mounting hole size and a required door thickness range, so check the packaging against your measurements. Also confirm whether the lock is designed for inset doors, overlay doors or both. Glass-front doors need a different approach, and you can read more in Baby Proofing Glass Cabinet Doors: 6 Steps for Safer Toddler Kitchens.
Sliding doors and drawers need different hardware. If your cabinets slide, Baby Proofing Sliding Cabinet Door: A Step-by-Step Guide for Toddler Homes covers the options. For a broader overview of hardware types, see Types of Cabinet Locks: 6 Best Picks for Toddler-Safe Homes (2026).
Step-by-Step Installation
Installation takes about 20 to 30 minutes per cabinet with basic tools. Work through the steps below in order.
- Empty the cabinet and clear the inside edge of the door.
- Mark the center point of the cam hole on the inside of the door. Keep the mark at least 1 inch from the top and bottom edges to avoid splitting the panel.
- Drill the bore hole to the diameter the lock specifies, using a sharp bit and drilling slowly to prevent tear-out.
- Insert the cam head into the bore so the key slot faces outward and the cam edge is parallel to the door edge.
- Mount the strike or bracket on the frame or adjacent door so the cam catches it when turned. Test the fit with the door closed before tightening screws.
- Turn the key to the locked position, then try to open the door by hand. The door should not move. Adjust the strike if it does.
- Store the key out of a child’s reach and test the lock once a month.
Common Mistakes to Avoid
- Drilling the bore too close to the edge, which weakens the panel and lets the lock pull out under force.
- Choosing a lock whose depth is longer than the cabinet wall, which prevents the cam from seating.
- Leaving keys in the lock or on a nearby hook where a child can reach them.
- Assuming one cam lock secures a double-door cabinet. Each door usually needs its own lock.
- Skipping a test after installation. A lock that looks secure may still release with a firm pull.
Recommended gear
A basic drill set with bits sized for wood or plastic is the tool most people need. Choose a drill with variable speed so you can start the bore slowly and avoid splintering. View on Amazon
A pencil and a combination square help you mark the cam center accurately, which matters more than most installers expect. View on Amazon
A pack of replacement keys and extra strike plates is worth having on hand, since keys go missing and mounting screws strip over time. View on Amazon
FAQ
Do cabinet door cam locks work on glass doors?
Standard cam locks are designed for solid wood, laminate or plastic panels, so they generally do not fit glass doors. Glass-front cabinets usually need a different locking method, such as a latch on the frame.
Can I install a cam lock without drilling?
Some surface-mounted cam lock designs avoid drilling, but they are usually less secure than bore-mounted versions. Check the manufacturer’s installation instructions and whether the product is rated for your door type.
How often should I check my cam locks?
Check them every month or two. Tighten any loose screws, test that the cam still engages the strike, and replace the lock if it turns loosely or the door opens with a light pull. For child-safety specifics, consult the product manufacturer or a qualified installer.
Conclusion
Cabinet door cam locks are a practical, low-profile way to keep doors closed when toddlers are exploring. Measure carefully, drill with care, and test every lock after installation. Keep keys out of reach, and recheck your hardware regularly as children grow and change how they move through the house.
