Ethan BrooksBy Ethan Brooks

Updated November 2026

Brass outlet covers floor models are a practical choice when you need a floor receptacle that stays flush, resists scuffs and blends with traditional or commercial interiors. Parents and homeowners usually look for three things: a secure lid that stays closed under foot traffic, a finish that holds up to years of use, and a box that fits the subfloor they already have. The picks below were selected by comparing manufacturer specifications, brand reputation and the patterns owners commonly report about fit, lid operation and durability.

Our top picks at a glance

  1. 1Kingdder 2 Pack Round Solid Brass Floor Outlet Cover PlatesTOP CHOICEBest overallKingdder 2 Pack Round Solid Brass Floor Outlet Cover PlatesView on Amazon
  2. 2ENERLITES Dual Flip Lid Floor Outlet CoverTOP CHOICEBest for weatherproof installsENERLITES Dual Flip Lid Floor Outlet CoverView on Amazon
  3. 3Leviton QuickPort Floor Jack AssemblyTOP CHOICEBest for data and phone cablingLeviton QuickPort Floor Jack AssemblyView on Amazon
  4. 4Kingdder 2 Pack Square Brass Floor Box CoverBest for square floor boxesKingdder 2 Pack Square Brass Floor Box CoverView on Amazon
  5. 5ENERLITES Flip Lid Floor Box KitBest for a complete kitENERLITES Flip Lid Floor Box KitView on Amazon
  6. 6RACO 6239BP 1-Gang Floor Box KitBest for wood, carpet and tile floorsRACO 6239BP 1-Gang Floor Box KitView on Amazon

Our Top Picks

Product Best for Key feature
Kingdder 2 Pack Round Solid Brass Floor Outlet Cover Plates Offices, hotels and general floor use Solid brass round cover with dual hinged lid
ENERLITES Dual Flip Lid Floor Outlet Cover Damp or outdoor-adjacent locations Gasketed, weather-resistant dual flip lid
Leviton QuickPort Floor Jack Assembly Data and telephone cabling Two blank QuickPort inserts in solid brass
Kingdder 2 Pack Square Brass Floor Box Cover Replacing worn square floor covers Square brass cover in 5.2 x 3.8 inch size
ENERLITES Flip Lid Floor Box Kit Complete installs with a junction box Includes junction box, gasket and flip lid
RACO 6239BP 1-Gang Floor Box Kit Wood, carpet and tile subfloors Tamper-resistant duplex receptacle in brass box

Kingdder 2 Pack Round Solid Brass Floor Outlet Cover Plates

Solid Brass Floor Outlet Cover Plates for Office Hotel School Commercial Floors Home Improvement Kingdder 2 Pack Round Brass Covers 6 Inch Dual Hinged Lid Floor Box, Round

Solid Brass Floor Outlet Cover Plates for Office Hotel School Commercial Floors Home Improvement Kingdder 2 Pack Round Brass Covers 6 Inch Dual Hinged Lid Floor Box, Round

View on Amazon

Best for: Best overall for general floor installations

This two-pack suits property managers, facility staff and homeowners who want a plain, durable round brass cover for a floor box in an office, school or hotel setting, or a finished home area.

Key specs:

  • Solid brass construction
  • Round, 6-inch format
  • Dual hinged lid
  • Sold as a 2-pack

Pros:

  • Solid brass body resists dents better than thin plated metal
  • Dual lids give access to two receptacles
  • Works as a replacement cover for many existing floor boxes

Cons:

  • Owners sometimes note the hinge needs a firm press to seat fully
  • Does not include a receptacle or junction box

Bottom line: A strong first choice if you need a durable, straightforward brass cover and already have a compatible floor box.

View on Amazon

ENERLITES Dual Flip Lid Floor Outlet Cover

Watertight Gasket, Tamper & Weather Resistant, 1-Gang, Box Sold Separately, UL Listed, In-Floor Installation ENERLITES Dual Flip Lid Floor Outlet Cover, 5.625" Dia, 1-Gang, 20A, Brass

Watertight Gasket, Tamper & Weather Resistant, 1-Gang, Box Sold Separately, UL Listed, In-Floor Installation ENERLITES Dual Flip Lid Floor Outlet Cover, 5.625" Dia, 1-Gang, 20A, Brass

View on Amazon

Best for: Best for weatherproof installs

This model fits installers and homeowners who need a gasketed cover for a floor location that may see moisture, dust or spills, such as a patio-adjacent room or a commercial kitchen area.

Key specs:

  • Brass finish
  • 1-gang, 20A rating as listed
  • Approximately 5.625-inch diameter
  • Tamper and weather resistant, UL listed per the listing

Pros:

  • Watertight gasket helps keep debris and liquids out
  • Dual flip lids allow use with a plug installed
  • Listing states UL certification

Cons:

  • Box is sold separately, so a compatible floor box must be purchased
  • Installation requires a cutout and proper leveling

Bottom line: Best for installers who want a sealed, listed cover for a damp-prone floor location.

View on Amazon

Leviton QuickPort Floor Jack Assembly

Leviton QuickPort Floor Jack Assembly, Two Blank Inserts, Solid Brass, 41652.0

Leviton QuickPort Floor Jack Assembly, Two Blank Inserts, Solid Brass, 41652.0

View on Amazon

Best for: Best for data and phone cabling

This assembly suits anyone running low-voltage data or telephone cable to a floor location, such as an office workstation or conference room, and who wants a brass finish that matches the rest of the floor hardware.

Key specs:

  • Solid brass
  • Two blank QuickPort inserts included
  • Leviton model 41652.0

Pros:

  • Blank inserts can be swapped for jacks later
  • Solid brass matches other floor box hardware
  • Designed for the QuickPort insert system

Cons:

  • Not intended for standard 120V duplex outlets
  • Inserts are sold for low-voltage use, so jacks must be chosen separately

Bottom line: The right pick for a low-voltage cabling run rather than household power.

View on Amazon

Kingdder 2 Pack Square Brass Floor Box Cover

Solid Brass Square Floor Outlet Cover Plates for Replacing Worn or Damaged Covers in Offices, Hotels, Schools and Home Kingdder 2 Pack Square Brass Floor Box Cover, Floor Outlet Plate, 5.2"x3.8"

Solid Brass Square Floor Outlet Cover Plates for Replacing Worn or Damaged Covers in Offices, Hotels, Schools and Home Kingdder 2 Pack Square Brass Floor Box Cover, Floor Outlet Plate, 5.2"x3.8"

View on Amazon

Best for: Best for square floor boxes

This two-pack targets people replacing a worn or damaged square floor cover, or matching a square box in a commercial or residential floor.

Key specs:

  • Solid brass
  • Square format, 5.2 x 3.8 inches
  • Sold as a 2-pack

Pros:

  • Replacement-focused design simplifies swap-outs
  • Solid brass finish is consistent with the round version
  • Two covers per order

Cons:

  • Fit depends on matching the existing box opening, so measure first
  • No gasket is described, so it suits dry locations best

Bottom line: Ideal for a like-for-like replacement of a square floor cover in a dry area.

View on Amazon

ENERLITES Flip Lid Floor Box Kit

Watertight Gasket, Corrosive Resistant, Tamper & Weather Resistant, 1-Gang, Includes Junction Box, In-Floor Installation ENERLITES Flip Lid Floor Box Kit, 5"x2.87", 1-Gang, 20A, Brass

Watertight Gasket, Corrosive Resistant, Tamper & Weather Resistant, 1-Gang, Includes Junction Box, In-Floor Installation ENERLITES Flip Lid Floor Box Kit, 5"x2.87", 1-Gang, 20A, Brass

View on Amazon

Best for: Best for a complete kit

This kit suits a new installation where you want the junction box, gasket and cover sourced together, particularly in a corrosive or moisture-prone location.

Key specs:

  • Brass flip lid
  • Approximately 5 x 2.87 inches
  • 1-gang, 20A rating as listed
  • Includes junction box

Pros:

  • Junction box included, so fewer parts to source
  • Watertight gasket and corrosion resistance are noted in the listing
  • Tamper and weather resistant design

Cons:

  • Smaller footprint may not fit older, larger floor openings
  • Installation still requires proper wiring knowledge

Bottom line: A good pick for a new install where a complete, matched kit saves sourcing time.

View on Amazon

RACO 6239BP 1-Gang Floor Box Kit

Tamper-Resistant Floor Outlet Kit for Indoor Wood, Carpet & Tile Floors, Requires 3-9/16 x 4-1/8 in. Cutout, UL & CSA RACO 6239BP 1-Gang Floor Box Kit, Recessed 15A TR Duplex Receptacle, Brass

Tamper-Resistant Floor Outlet Kit for Indoor Wood, Carpet & Tile Floors, Requires 3-9/16 x 4-1/8 in. Cutout, UL & CSA RACO 6239BP 1-Gang Floor Box Kit, Recessed 15A TR Duplex Receptacle, Brass

View on Amazon

Best for: Best for wood, carpet and tile floors

This kit is aimed at installers cutting a floor opening in wood, carpet or tile who need a tamper-resistant duplex receptacle in a brass box.

Key specs:

  • Brass floor box
  • 1-gang, recessed, 15A tamper-resistant duplex receptacle
  • Requires a 3-9/16 x 4-1/8 inch cutout
  • UL and CSA listed per the listing

Pros:

  • Tamper-resistant receptacle is included
  • Designed for several common floor types
  • Standard cutout size simplifies planning

Cons:

  • Cutout must be precise, which requires care with tools
  • 15A rating may not suit every high-draw use

Bottom line: Best for a power receptacle in a wood, carpet or tile floor where tamper resistance matters.

View on Amazon

Buying Guide

Confirm the cutout and box size

Measure the opening before you order. Many floor covers are sized for a specific box, and the RACO kit, for example, calls for a 3-9/16 x 4-1/8 inch cutout. A cover that is even slightly too large will not seat flush, and one that is too small will not hide the box.

Good picks for this: RACO 6239BP 1-Gang Floor Box Kit, Kingdder 2 Pack Square Brass Floor Box Cover

Solid brass versus plated finishes

Solid brass resists dents and wears more evenly than thin plated metal. If the cover will take foot traffic, a solid body is a sensible choice. Check whether the listing describes the material as solid brass rather than brass-tone.

Good picks for this: Kingdder 2 Pack Round Solid Brass Floor Outlet Cover Plates, Leviton QuickPort Floor Jack Assembly

Weather and moisture resistance

Look for a gasket and a listed rating if the floor location may see spills, cleaning water or outdoor-adjacent humidity. Gasketed covers keep debris out of the receptacle and reduce the chance of corrosion.

Good picks for this: ENERLITES Dual Flip Lid Floor Outlet Cover, ENERLITES Flip Lid Floor Box Kit

Power versus low-voltage use

Decide whether the box will carry household power or data and phone cable. Standard duplex receptacles and low-voltage inserts are not interchangeable. Choose a QuickPort-style assembly for cabling and a receptacle kit for 120V use.

Good picks for this: Leviton QuickPort Floor Jack Assembly, RACO 6239BP 1-Gang Floor Box Kit

Subfloor type

Wood, carpet and tile each need a suitable box and fastening approach. Kits designed for several floor types reduce the risk of a poor fit, but always confirm the listed floor types match your installation.

Good picks for this: RACO 6239BP 1-Gang Floor Box Kit, ENERLITES Flip Lid Floor Box Kit

Lid design and access

Dual flip lids let you keep one receptacle covered while using another, and hinged lids keep the cover from being lost. Check that the lid opens far enough for a plug to fit under it without strain.

Good picks for this: ENERLITES Dual Flip Lid Floor Outlet Cover, Kingdder 2 Pack Round Solid Brass Floor Outlet Cover Plates

Durability and care

Brass develops a patina over time. Wipe covers with a soft cloth and mild soap, avoid abrasive cleaners, and check hinges and gaskets each year. A solid cover with a firm hinge will last longer under heavy foot traffic.

Good picks for this: Kingdder 2 Pack Round Solid Brass Floor Outlet Cover Plates, Kingdder 2 Pack Square Brass Floor Box Cover

FAQ

Are brass floor outlet covers safe for toddlers?

A closed, flush cover with a tamper-resistant receptacle reduces access to live contacts. Floor outlets are still reachable by crawling children, so keep lids closed when not in use and consider a tamper-resistant model. Consult a licensed electrician for installation.

What is the difference between a floor box and a floor outlet cover?

The floor box is the housing set into the subfloor, and the cover is the lid that sits on top. Some kits include both, while others sell the cover alone to fit an existing box.

Do I need an electrician to install a floor outlet?

Cutting a floor opening and wiring a receptacle involve electrical work and local code requirements. A licensed electrician is the right choice for household power circuits. Low-voltage cabling is often handled by a data installer.

Can I use a brass floor cover outdoors?

Some covers are weather resistant, but outdoor placement involves additional standards for moisture, temperature and ground conditions. Check the listing for an explicit outdoor rating before using any cover in an exposed location.

How do I clean a brass floor outlet cover?

Use warm water and a mild soap with a soft cloth. Dry the cover thoroughly to prevent water spots. Avoid harsh chemicals that can strip the finish.

Will brass tarnish over time?

Brass naturally darkens and develops a patina with exposure to air and handling. A regular cleaning routine keeps the surface even. Lacquered finishes may resist tarnish longer but can scratch.

Conclusion

For a general-purpose solid brass cover, the Kingdder round two-pack is the most versatile starting point. Choose the ENERLITES dual flip lid model for a gasketed cover in a damp-prone location, and the Leviton QuickPort assembly for low-voltage cabling. Square replacements suit the Kingdder square cover, while the ENERLITES kit suits new installs that need a junction box. The RACO kit is the best fit for a tamper-resistant receptacle in wood, carpet or tile. Always confirm the cutout size, listing and local code before buying, and consult a licensed electrician for any household power work.

Sources

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our childproofing guides, checking product details against manufacturer specifications and owner feedback.