Updated November 2026
Floor plate outlet covers let you run power to a desk, couch or kitchen island without a cord trailing across the room. The cover sits flush with the floor, has a hinged or flip lid, and protects the receptacle inside when nothing is plugged in. This guide compares seven floor plate outlet covers across the criteria that matter most: fit with your flooring, lid design, material, whether the box and receptacle are included or sold separately, and how well the cover resists dust, spills and foot traffic. Each pick is described from its listing and the features manufacturers specify, not from hands-on testing.
Our top picks at a glance
- 1
TOP CHOICEBest overallSolid Brass Floor Outlet Cover Plates for Office Hotel School CommerciView on Amazon - 2
TOP CHOICEBest for square floor boxesSolid Brass Square Floor Outlet Cover Plates for Replacing Worn or DamView on Amazon - 3
TOP CHOICEBest for weatherproof usePlastic Duplex Floor Outlet Cover Plate, Weatherproof Replacement forView on Amazon - 4
Best for tamper resistanceWatertight Gasket, Tamper & Weather Resistant, 1-Gang, Box Sold SeparaView on Amazon - 5
Best for auto-closing lidsFor RACO 5511 Floor Box (Required), Floor Box Cover Plate, Auto-ClosinView on Amazon - 6
Best for gasketed installsNeoprene Gaskets, Either Side Usable with Cover Closed, Adjustable BoxView on Amazon - 7
Best budget pick20A Recessed Floor Outlet Cover Plate, Flip Lid Cover Floor Box Kit ReView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| Plastic Duplex Floor Outlet Cover Plate, Bronze | Weatherproof replacement covers | Plastic body with bronze finish |
| Kingdder Solid Brass Floor Outlet Cover Plates (round) | Commercial and high-traffic floors | Solid brass, dual hinged lid |
| ENERLITES Dual Flip Lid Floor Outlet Cover | Tamper and weather resistance | Watertight gasket, UL listed |
| RACO Round Nonmetallic Floor Box Cover Kit | Auto-closing duplex coverage | Auto-closing flap, carpet flange |
| Kingdder Solid Brass Square Floor Outlet Cover Plates | Square floor boxes | Solid brass, 5.2 x 3.8 inch plate |
| RACO 1-Gang Floor Box Kit, Recessed Duplex 15A TR | Gasketed, adjustable installs | Neoprene gaskets, tamper resistant |
| 20A Recessed Floor Outlet Cover Plate Flip Lid Kit | Budget-minded replacements | Flip lid for flooring and tile |
Plastic Duplex Floor Outlet Cover Plate, Weatherproof Replacement for Countertop Home, 1 Set 5133678 Round Floor Box Cover, Floor Electrical Outlet Cover Plate, Bronze
Plastic Duplex Floor Outlet Cover Plate, Weatherproof Replacement for Countertop Home, 1 Set 5133678 Round Floor Box Cover, Floor Electrical Outlet Cover Plate, Bronze
Best for: Weatherproof replacement covers for round floor boxes
This is a good fit for homeowners replacing a worn or cracked cover on an existing round floor box, especially where moisture is a concern. The plastic body avoids the weight and cost of metal and suits areas where a light, corrosion-resistant cover is preferred.
Key specs
- Round floor box cover, duplex configuration
- Plastic construction with bronze finish
- Sold as a single set
Pros
- Lightweight and resistant to corrosion
- Matches common bronze-toned fixtures
- Straightforward replacement for many round boxes
Cons
- Plastic may show wear sooner than brass under heavy foot traffic
- Confirm the box diameter before ordering
Bottom line: A sensible pick for a home replacement where weather exposure and a bronze look matter more than heavy-duty durability.
Solid Brass Floor Outlet Cover Plates for Office Hotel School Commercial Floors Home Improvement Kingdder 2 Pack Round Brass Covers 6 Inch Dual Hinged Lid Floor Box, Round
Solid Brass Floor Outlet Cover Plates for Office Hotel School Commercial Floors Home Improvement Kingdder 2 Pack Round Brass Covers 6 Inch Dual Hinged Lid Floor Box, Round
Best for: Best overall for durable round floor covers
Suited to busy spaces such as offices, classrooms and hotel lobbies, and to homeowners who want a heavier cover that will hold up to repeated stepping. The two-pack format is useful for covering more than one outlet.
Key specs
- Solid brass construction
- 6-inch round format
- Dual hinged lid, 2-pack
Pros
- Solid brass resists dents better than thin plastic
- Dual hinged lid gives access to both sides
- Two covers per purchase
Cons
- Brass is heavier and can scratch if not kept clean
- Box and receptacle are typically not included
Bottom line: The strongest all-around choice for round floor boxes that need to handle regular foot traffic.
ENERLITES Dual Flip Lid Floor Outlet Cover, Watertight Gasket, Tamper & Weather Resistant, 1-Gang, Box Sold Separately, UL Listed, In-Floor Installation, 5.625″ Dia, 20A, Brass
Watertight Gasket, Tamper & Weather Resistant, 1-Gang, Box Sold Separately, UL Listed, In-Floor Installation ENERLITES Dual Flip Lid Floor Outlet Cover, 5.625" Dia, 1-Gang, 20A, Brass
Best for: Best for tamper and weather resistance
This suits installers and homeowners who want a cover that is watertight, tamper resistant and listed for in-floor use. It is a good match for garages, patios and any location where spills or moisture are likely.
Key specs
- 5.625-inch diameter, 1-gang
- 20A rating, brass finish
- Watertight gasket, UL listed
Pros
- Gasket supports a watertight seal
- Listed for in-floor installation
- Dual flip lid protects the receptacle
Cons
- The floor box must be purchased separately
- Installation should follow the manufacturer’s instructions and local code
Bottom line: A good choice when weather sealing and listed construction are priorities.
RACO Round Nonmetallic Floor Box Cover Kit, Auto-Closing Duplex Flap, Carpet Flange Included, UL Listed
For RACO 5511 Floor Box (Required), Floor Box Cover Plate, Auto-Closing Duplex Flap, Carpet Flange Included, UL Listed RACO Round Nonmetallic Floor Box Cover Kit, Two-Lift Lids, Gray
Best for: Best for auto-closing lids
Well suited to carpeted rooms and open-plan spaces where a lid that closes on its own reduces trip hazards and debris. The kit is built around the RACO 5511 floor box.
Key specs
- Round nonmetallic cover kit, gray
- Auto-closing duplex flap, two-lift lids
- Carpet flange included
Pros
- Auto-closing lid helps keep the receptacle covered
- Carpet flange simplifies carpeted installs
- Listed for use
Cons
- Requires the compatible RACO 5511 floor box
- Nonmetallic body may not suit every code situation
Bottom line: Best for carpeted floors where you want the lid to close automatically and the box is already a RACO 5511.
Solid Brass Square Floor Outlet Cover Plates for Replacing Worn or Damaged Covers in Offices, Hotels, Schools and Home Kingdder 2 Pack Square Brass Floor Box Cover, Floor Outlet Plate, 5.2″x3.8″
Solid Brass Square Floor Outlet Cover Plates for Replacing Worn or Damaged Covers in Offices, Hotels, Schools and Home Kingdder 2 Pack Square Brass Floor Box Cover, Floor Outlet Plate, 5.2"x3.8"
Best for: Best for square floor boxes
Aimed at replacing a worn square cover in a commercial or home setting. The two-pack and solid brass build make it a practical replacement for a high-use square outlet.
Key specs
- Solid brass, square format
- Plate size about 5.2 x 3.8 inches
- Two covers per pack
Pros
- Solid brass holds up to foot traffic
- Square format matches many existing boxes
- Two-pack covers multiple outlets
Cons
- Measure your existing box before buying, since square sizes vary
- Brass shows scratches over time
Bottom line: The right replacement if your existing floor box is square and needs a sturdy cover.
RACO 1-Gang Floor Box Kit, Recessed Duplex 15A TR, Neoprene Gaskets, Either Side Usable, Adjustable Box, Round Floor Outlet Cover, Tamper Resistant, 125V, Black
Neoprene Gaskets, Either Side Usable with Cover Closed, Adjustable Box, Round Floor Outlet Cover, Tamper Resistant, 125V RACO 1-Gang Floor Box Kit, Recessed Duplex 15A TR, Black
Best for: Best for gasketed, adjustable installs
A good fit for new installs where a gasketed seal and an adjustable box help the cover sit flush with finished flooring. The tamper-resistant receptacle adds a safety layer in homes with children.
Key specs
- 1-gang recessed duplex, 15A, 125V
- Tamper-resistant receptacle
- Neoprene gaskets, adjustable box
Pros
- Neoprene gaskets help block moisture and dust
- Tamper-resistant receptacle
- Adjustable box helps with flush mounting
Cons
- Black finish may not match brass or bronze décor
- New installation may require an electrician
Bottom line: Best for a new recessed install where sealing and tamper resistance are both needed.
20A Recessed Floor Outlet Cover Plate, Flip Lid Cover Floor Box Kit Resistant Duplex Outlet Cover Boxs, Brass Finish Electrical Outlet Box Suitable for Flooring, Tiles, Carpets
20A Recessed Floor Outlet Cover Plate, Flip Lid Cover Floor Box Kit Resistant Duplex Outlet Cover Boxs, Brass Finish Electrical Outlet Box Suitable for Flooring,Tiles,Carpets.
Best for: Best budget pick
Suited to homeowners on a tighter plan who want a brass-look flip-lid cover for flooring, tile or carpet. It is a practical choice for a single outlet in a living room or office.
Key specs
- 20A recessed duplex configuration
- Flip lid, brass finish
- Suitable for flooring, tile and carpet
Pros
- Flip lid protects the receptacle when unused
- Brass finish suits many interiors
- Broad flooring compatibility
Cons
- Owners often report that finish and fit should be checked on arrival
- Less robust than solid brass covers under heavy use
Bottom line: A sensible starting point for a single outlet where cost is a major factor.
Buying Guide
Box type and diameter
Before comparing covers, identify your floor box. Round and square boxes use different covers, and diameters vary. Measure the opening across the widest point and check the box manufacturer’s specs. A cover that is even slightly off can leave a gap or fail to seat.
Good picks for this: Kingdder Solid Brass Floor Outlet Cover Plates (round), Kingdder Solid Brass Square Floor Outlet Cover Plates
Material: brass, plastic or steel
Solid brass is heavy and durable, and it resists dents. Plastic is lighter and resists corrosion but can wear sooner under foot traffic. Choose based on how heavily the floor is used and whether moisture is present.
Good picks for this: Plastic Duplex Floor Outlet Cover Plate, Bronze, Kingdder Solid Brass Floor Outlet Cover Plates (round)
Lid design and auto-closing
Flip lids and dual hinged lids give access to the receptacle, while auto-closing flaps reduce the chance a lid is left open. Consider how often you plug and unplug devices and whether the cover will be stepped on.
Good picks for this: RACO Round Nonmetallic Floor Box Cover Kit, 20A Recessed Floor Outlet Cover Plate Flip Lid Kit
Weather and moisture sealing
Outdoor, garage and kitchen floors may see moisture. Look for gaskets and listings that mention watertight or weather-resistant use. Keep in mind that a gasket only works if the lid closes fully.
Good picks for this: ENERLITES Dual Flip Lid Floor Outlet Cover, RACO 1-Gang Floor Box Kit, Recessed Duplex 15A TR
Tamper resistance and safety
In homes with young children, tamper-resistant receptacles and tight-closing lids reduce the chance of objects being pushed into slots. Pay attention to the receptacle rating and confirm the product is listed for your application.
Good picks for this: ENERLITES Dual Flip Lid Floor Outlet Cover, RACO 1-Gang Floor Box Kit, Recessed Duplex 15A TR
Durability and care
Solid brass resists denting but may scratch and needs occasional cleaning to keep its finish. Plastic avoids tarnish but can crack under impact. Check whether the cover is sold in packs if you need to replace several at once.
Good picks for this: Kingdder Solid Brass Floor Outlet Cover Plates (round), Plastic Duplex Floor Outlet Cover Plate, Bronze
Installation and code compliance
Many floor boxes and receptacles require professional installation, especially when wiring is involved. Confirm that the cover, box and receptacle are compatible, and follow local electrical code. Consult a licensed electrician for new or modified circuits.
Good picks for this: RACO Round Nonmetallic Floor Box Cover Kit, ENERLITES Dual Flip Lid Floor Outlet Cover
FAQ
Do floor plate outlet covers come with the outlet box?
Most do not. Many listings are for the cover plate only, and the floor box and receptacle are sold separately. Check the listing details before you buy so you do not end up with a cover that does not fit your box.
Can I replace a worn floor plate outlet cover myself?
Replacing only the cover is often a simple job, but it still involves a live electrical box. If you are unsure about the wiring or the box, hire a licensed electrician.
What size floor box do I need?
Measure the opening of your existing box across its widest point, and note whether it is round or square. Compare these numbers with the diameter or plate size in the product listing.
Are brass or plastic floor covers better?
Brass is heavier and tends to hold up better under foot traffic. Plastic is lighter and resists corrosion. Neither is universally better; the right choice depends on your floor and environment.
Do I need a tamper-resistant outlet?
Tamper-resistant receptacles are common in new construction and are a useful safety feature in homes with young children. Check local code and the receptacle specifications for your situation.
Can floor plate outlet covers be used outdoors?
Some are rated for weather exposure and include gaskets, while others are indoor-only. Check the listing for weather-resistant or watertight language and confirm the rating suits your location.
Conclusion
For most round floor boxes in busy spaces, the solid brass round two-pack is the strongest all-around choice. Choose the square brass cover if your box is square, the ENERLITES or RACO gasketed options if moisture or tamper resistance matters most, and the plastic bronze cover for lightweight weather-exposed replacements. The budget flip-lid kit fits a single outlet where cost is the main concern. Always confirm box size and check local electrical code before installing.
Sources
- Consumer safety guidance on electrical hazards and home childproofing (cpsc.gov)
- Electrical safety standards and information on the National Electrical Code (nfpa.org)
- Background on UL listing and how listed electrical products are evaluated (ul.com)
