Updated November 2026
Jumbo outlet covers are oversized plates that fit over a standard duplex receptacle and extend past its edges, which makes them harder for a toddler to pry off. If you are shopping jumbo outlet covers at Lowe’s, the goal is to confirm the cover fits your box, matches your wall, and is installed so no part of the outlet is exposed. This guide walks through the steps.
Measure Your Outlets Before You Shop
Jumbo covers are sized to clear a standard single-gang or duplex wall plate with room to spare, but outlets in older homes and some decorator boxes sit off-center or sit proud of the drywall. Measure the existing wall plate from edge to edge and note the height and width. Then check whether the outlet is recessed, flush or protruding, because a cover designed for a flush box can sit loose on a proud one.
Shopping for one? See our guide: Outlet Plug Covers Lowe's: 6 Best Picks for Toddler-Safe Homes.
Also check the number of gangs. A double outlet or an outlet with a switch next to it needs a multi-gang jumbo cover, not a single-gang one.
Choose a Style That Fits the Room
Most jumbo covers at the big-box stores come in a few finishes: plain white, ivory, almond and a handful of brushed or wood-look options. Matching the color to the wall reduces visual clutter, which matters if a family member wants the cover left in place long term. For a closer look at color decisions, see Should Outlet Covers Match Wall or Trim? Here's the Answer.
Consider whether you want a spring-loaded or hinged door. Some jumbo covers include a built-in door that closes over the outlet, which is useful when a plug is not in use. Others are solid plates that require removing the cover to access the outlet. Both work, but a solid plate is harder to open for a child.
Install the Cover Safely
Installation is simple, but the power should be off first. Turn off the breaker that serves the outlet, then confirm the outlet is dead with a non-contact voltage tester before you touch any wires.
- Turn off the breaker and verify no power with a tester.
- Remove the existing wall plate and set the screws aside.
- Hold the jumbo cover against the box and check that it sits flat with no gap at the edges.
- Secure the cover with the screws included in the package, snug but not overtightened, so the plate does not crack.
- Restore power and test that the cover does not interfere with the plug holes.
If the cover does not sit flat, the box may be recessed too far, and a box extender or a different cover type may be needed. For screw sizing and related hardware, see What Size Screws for Outlet Covers? A Step-by-Step Guide for Toddler Homes.
Tools and Materials Checklist
- Non-contact voltage tester
- Phillips and flathead screwdrivers
- Jumbo outlet cover with matching screws
- Tape measure
- Level (optional, for a neat finish)
Common Mistakes to Avoid
- Buying a single-gang cover for a double outlet, which leaves openings exposed.
- Skipping the power-off step because the outlet looks unused.
- Overtightening screws on a plastic plate, which can crack the cover.
- Assuming a cover is child-resistant when it has no door or lock. Check the package.
- Leaving a cover loose on a proud box, which lets a child pull it off.
Recommended Gear
- A non-contact voltage tester helps confirm the outlet has no power before you remove the plate. View on Amazon
- A basic screwdriver set with insulated handles gives you the right tip sizes for cover screws. View on Amazon
FAQ
Do jumbo outlet covers stop toddlers from reaching outlet slots?
A properly seated jumbo cover with closed doors or no openings helps keep fingers and objects away from the slots. Covers without doors still need the plug holes blocked by a plug or a separate insert for full protection.
Can I install a jumbo cover over a GFCI outlet?
Many jumbo covers fit GFCI receptacles, but check the cover’s clearance against the test and reset buttons. If the buttons are blocked, the cover is not suitable.
Should I hire an electrician to install outlet covers?
Swapping a plate with the power off is a basic task for many homeowners. If you find loose wiring, scorch marks or outlets that feel warm, consult a licensed electrician before proceeding.
Conclusion
Choosing jumbo outlet covers from Lowe’s comes down to measuring your boxes, matching the style to the room, and installing with the power off. A snug fit with no gaps gives the best protection for a toddler. Recheck covers after any renovation or outlet change.
