Updated November 2026
If you are shopping for furniture anchors at Canadian Tire, the goal is simple: keep a dresser, bookcase or TV from tipping onto a child who climbs on it. This guide explains how to choose the right anchor type for your furniture and wall, how to install it, and what to check afterward. Store stock and product lines vary, so confirm availability with the store or the official website before you go.
Step 1: Identify Your Furniture and Wall Type
Start with the piece you need to secure. Tall, narrow dressers, bookcases and flat-screen TV stands are the most common tip-over hazards for toddlers. Check the back of the furniture for a pre-drilled anchor point or a keyhole slot, since many manufacturers include one.
Shopping for one? See our guide: 7 Best Ace Hardware Furniture Anchors for Baby Proofing (2026).
Next, find out what your wall is made of. Drywall, plaster over lath and masonry each need a different fastener. Tap the wall with a knuckle: a hollow sound usually means drywall, while a dense, solid sound suggests plaster or masonry. Many stud finders can also locate framing, which gives the strongest hold.
Step 2: Choose the Right Anchor Type
Match the anchor to both the furniture and the wall. The table below summarizes common options. Verify weight ratings on the packaging, and do not rely on a single small anchor for heavy furniture.
| Anchor type | Best for | Installation |
|---|---|---|
| Metal L-bracket or angle anchor | Dressers and bookcases fixed into studs | Screws into a wall stud |
| Strap or cable anchor | TVs and tall furniture | Two-point mount, stud or heavy-duty wall anchor |
| Toggle or molly bolt | Hollow drywall when no stud is in reach | Drill a larger hole, expand behind the wall |
| Adhesive or no-drill anchor | Renters and light items | Peel and stick, check the weight limit |
Step 3: Gather Your Tools and Supplies
- Stud finder and pencil
- Level
- Drill with bits sized to the anchor and screws
- Screwdriver
- Anchor kit, including screws and any wall plugs
- Tape measure
Step 4: Install the Anchor Securely
Mark and drill
Mark the anchor height so it sits as high on the furniture as the hardware allows. Drill pilot holes slightly smaller than the screw shank. Pilot holes keep the wood or drywall from splitting. For a stud mount, drive the screw at least 1 inch into solid framing.
Attach and test
Fasten the furniture bracket to the back or top of the piece, then secure the wall end. Push and pull the furniture firmly in several directions. It should not rock, shift or pull free from the bracket.
Common Mistakes to Avoid
- Anchoring to drywall only, when a stud is available a few inches away.
- Using adhesive anchors on heavy dressers or TVs.
- Skipping the level, which leaves the furniture leaning and stressing the anchor.
- Forgetting to re-check anchors after moving furniture or rearranging a room.
- Placing a TV on a dresser that is not anchored itself.
Recommended Gear
A stud finder makes it easier to locate framing before drilling, which is the single biggest factor in a strong hold.
View on Amazon
A basic level keeps the furniture plumb so the anchor carries weight evenly.
View on Amazon
A strap-style anchor kit suits TVs and tall furniture where a single bracket is not enough.
View on Amazon
FAQ
Does Canadian Tire carry furniture anchors?
Canadian Tire typically stocks a range of anchoring hardware, but selection changes by location and season. Check the official website or call your local store to confirm current stock before visiting.
Can I use drywall anchors for a dresser?
Plastic drywall anchors alone are generally not strong enough for a full dresser. Anchor into a stud whenever possible, and use toggle-style hardware only where the manufacturer specifies it.
Should I consult a professional?
If your wall is plaster, masonry or unusually weak, or you are unsure about the weight rating, consult a qualified handyman or contractor before drilling. Safety depends on the wall and furniture, so professional advice is worthwhile in those cases.
Conclusion
Securing furniture takes about an hour and prevents one of the most serious toddler injuries in the home. Identify your wall and furniture, choose an anchor rated for the load, and test every connection once it is installed. Re-check the anchors every few months, especially after moving furniture.
