Updated November 2026

Outlet covers for HDMI cables are not a standard product, and that matters for how you childproof your TV area. An HDMI cable carries video and audio, not household power, so it does not need the same covering as a wall outlet. What it does need is protection from chewing, yanking and tripping, because a toddler who pulls a TV cable can topple a television or find a power cord hanging from the same bundle. This guide shows you how to manage HDMI cables with the right tools and where a plug cover or cable cover actually fits.

Understand What Actually Needs Covering

Before buying anything, separate the two hazards in your entertainment area. The HDMI cable itself is a low-voltage data line, and its real risks are strangulation loops, trip hazards and the weight of a TV or soundbar pulling on the port. The power cord and the wall outlet behind the TV are the electrical hazards. Outlet covers, sometimes called plug covers or receptacle covers, belong on the wall outlet, not on the HDMI port. If your TV is plugged into a standard outlet, use a tamper-resistant receptacle or a snap-in cover on any unused outlet nearby, and manage the HDMI run separately. For more on terminology, see What Are Outlet Covers Called? Terms, Types and How to Choose.

Shopping for one? See our guide: 7 Best Outlet Covers for Floor Installations Compared (2026).

Step 1: Secure the Outlet Behind the TV

Start with the power side. Cover every unused outlet in the room, and check that any outlet within reach of a toddler has a tamper-resistant design or a cover. Measure the faceplate screws before buying replacements, since sizes vary; What Size Screws for Outlet Covers? A Step-by-Step Guide for Toddler Homes walks through that check. Keep the TV plug seated fully and avoid daisy-chaining power strips behind the set.

Step 2: Route the HDMI Cable Out of Reach

Next, control the cable run itself. Use these steps:

  1. Measure the distance from the TV port to the source device, adding about 6 inches of slack, and buy a cable that is no longer than that.
  2. Run the cable along the wall or behind the TV stand, keeping it at least 3 feet above the floor where a toddler can reach from a standing position.
  3. Bundle the HDMI cable with the power cord using hook-and-loop ties, but keep them in separate channels where possible so the power line is never the one pulled.
  4. Secure the run at each end and every 12 to 18 inches with adhesive clips or cable raceway.
  5. Check that no loop is long enough to wrap around a neck or arm.

Step 3: Choose the Right Cable Management Method

Pick a method that matches your wall and furniture. Paintable raceway works well on drywall and can be painted to match the wall. Adhesive cable channels suit rentals, though they need a clean, dry surface. For a TV mounted above a console, a recessed in-wall kit is the cleanest option but requires cutting drywall and, for power, a licensed electrician. Consult a professional before opening walls or working with any line voltage.

Check Your Connections Monthly

Connections loosen over time, especially when a child tugs at the cable. Once a month, look for cables that have pulled out of their clips, ports that have come partly loose and any fraying along the jacket.

Common Mistakes

  • Treating an HDMI cable as though it needs a wall outlet cover, leaving the real power outlet uncovered.
  • Leaving slack loops at floor level where a toddler can grab them.
  • Bundling the HDMI cable and power cord so tightly that pulling one drags the other.
  • Using adhesive clips on painted surfaces that peel paint when removed.
  • Buying a cable much longer than needed, which creates extra loops to manage.
  • Cable raceway kit: Hides the HDMI run along a wall in one channel, keeping it off the floor.
    View on Amazon
  • Adhesive cable clips: Hold the run in place without drilling, which suits rentals.
    View on Amazon
  • Tamper-resistant outlet covers: Cover unused wall outlets near the TV.
    View on Amazon

FAQ

Do HDMI cables need outlet covers?

No. HDMI cables carry low-voltage video and audio, so they do not need outlet covers. Cover the wall outlets that power the TV and nearby devices instead.

Can a toddler be hurt by an HDMI cable?

The main risks are tripping, pulling the TV over and cord loops that could wrap around a neck. Keeping the run short and mounted high reduces these risks.

Where should I put a plug cover near a TV?

Place it on any unused outlet in the room, especially those at toddler height. For outlets in use, a tamper-resistant receptacle is a better choice than a removable cover.

Conclusion

Outlet covers belong on the wall, and HDMI cables need routing rather than covering. Secure the power outlets, shorten and anchor the HDMI run, and keep both lines out of reach. Check the setup monthly and revisit it whenever you move the TV or add a device.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our childproofing guides, checking product details against manufacturer specifications and owner feedback.