Updated November 2026
Outlet covers for nursery walls keep curious fingers and small objects out of live electrical slots. This guide walks you through checking every outlet in the room, choosing the right cover type, and installing it so it stays put. Most nurseries need covers on every outlet that a child could reach, including low outlets behind furniture.
Step 1: Map Every Outlet in the Room
Walk the room at toddler eye level and at floor level. Count every receptacle, including those behind the dresser, under the window, and beside the changing table. Note any outlet that is partly hidden by a rocker, crib or bookcase, since a child who can reach it can still reach it later when the furniture is moved.
Shopping for one? See our guide: 7 Best Outlet Covers for Floor Installations Compared (2026).
Outlets near the floor are the highest priority. A crawling baby reaches them first, and a toddler can insert objects into them quickly.
Step 2: Choose the Right Cover Type
Several cover styles work well in a nursery. The best choice depends on whether the outlet is in use and how often you plug and unplug devices.
- Sliding covers stay closed when nothing is plugged in and open only when a plug is inserted. They suit outlets you rarely use.
- Plug-in covers are inserted into each slot. They are simple and inexpensive, but they can be pulled out, so check them often.
- Box-style covers enclose the entire receptacle and allow cords to exit through a gap. They work well for outlets with a monitor, lamp or sound machine always plugged in.
- Tamper-resistant outlets have built-in shutters. If your home already has them, you may not need added covers, though a box cover still helps with cord access.
For a deeper comparison of styles, see Types of Outlet Covers: 5 Styles Compared for Toddler-Safe Homes and What Are Outlet Covers Called? Terms, Types and How to Choose.
Step 3: Match Size and Finish to the Wall
Standard duplex outlets use a single-gang or double-gang cover plate. Measure the wall plate before buying, and check that the cover matches the number of receptacles it must hide. Finish matters too: a cover that contrasts sharply with the wall draws attention, which can encourage a child to explore it. Many parents choose a color close to the wall tone. For guidance, read What Color Outlet Covers Should I Use? White vs Ivory (2026) and Should Outlet Covers Match Wall or Trim? Here's the Answer.
Step 4: Install Covers Securely
Before you start, switch off the breaker for that circuit and confirm the outlet has no power using a voltage tester. Then follow these steps:
- Remove the existing cover plate with a screwdriver.
- Check that the new cover fits flush against the wall without gaps.
- Use the screws supplied with the cover, or a size that seats firmly in the outlet box. Screws that are too long can crack the cover, and screws that are too short will loosen over time. Our guide on What Size Screws for Outlet Covers? A Step-by-Step Guide for Toddler Homes explains how to pick the right fit.
- Tighten gently until the cover sits flat. Do not overtighten.
- Restore power and test the outlet with a device to confirm it still works.
If you are unsure about wiring, or if the outlet box feels loose or warm, stop and call a licensed electrician.
Common Mistakes to Avoid
- Covering only the outlets you see at adult height and missing low ones behind furniture.
- Using plug-in covers on outlets that get frequent use, then forgetting to check them.
- Leaving a cord running from a covered outlet where a child can grab it.
- Skipping the check after a cleaning or moving day, when covers are often knocked loose.
- Buying covers that are not the right size for a double-gang plate, leaving a gap on one side.
Recommended Gear
- Sliding outlet covers: Good for rarely used outlets because they stay shut until a plug is inserted. View on Amazon
- Outlet box covers: Useful for outlets with a lamp or sound machine always plugged in, since cords exit through a gap. View on Amazon
- Non-contact voltage tester: Lets you confirm an outlet is de-energized before you remove a cover plate. View on Amazon
FAQ
Do I need outlet covers if my outlets are tamper-resistant?
Tamper-resistant outlets have built-in shutters that block objects from entering the slots, so they are a strong starting point. A cover can still help by controlling cords and keeping the plate itself out of reach.
Where should outlet covers go in a nursery?
Cover every outlet a child could reach, with special attention to those near the floor, beside the crib, and behind furniture. Outlets above the reach of a toddler still matter if a child can climb onto a chair or dresser.
Can I install outlet covers myself?
Many covers install with a basic screwdriver after you turn off the breaker and confirm there is no power. If the wiring looks damaged or you are uncomfortable working near electricity, consult a licensed electrician.
Conclusion
Outlet covers for nursery use are most effective when you cover every reachable outlet, choose a style that fits how each outlet is used, and check them regularly. Walk the room once a month to confirm nothing has loosened. A few minutes of attention protects your child throughout the toddler years.
