Updated November 2026

When outlet covers not flush with wall is the problem, the cover sits proud of the surface, rocks side to side, or leaves a visible gap around the edges. The fix is usually a thin metal or plastic spacer that brings the electrical box up to the finished wall. The three spacers below were chosen by comparing product listings, brand reputation and common owner feedback, looking at how each one suits different wall depths and box conditions.

Our top picks at a glance

  1. 1Wall Plate Spacer 10 Pcs Metal Flush Fit Device Leveling PlatesTOP CHOICEBest overallWall Plate Spacer 10 Pcs Metal Flush Fit Device Leveling PlatesView on Amazon
  2. 2Metal Wall Plate Spacer 10 Pcs Flush Fit Outlet ShimBest for heavy-duty metal finishMetal Wall Plate Spacer 10 Pcs Flush Fit Outlet ShimView on Amazon
  3. 3Outlet Spacer Flush Fit Device Leveling Plates For Wall Outlet RepairBest for self-leveling on uneven boxesOutlet Spacer Flush Fit Device Leveling Plates For Wall Outlet RepairView on Amazon

Our Top Picks

Quick Comparison

Product Best for Key feature
Wall Plate Spacer 10 Pcs (B0DTHPRSFS) Loose outlets in general repair Metal flush-fit leveling plates
Metal Wall Plate Spacer 10 Pcs (B0HN6MLZY3) Heavy-duty support on switches Wide-perimeter metal support
Outlet Spacer Flush Fit Plates (B0DH29CT95) Uneven or recessed electrical boxes Self-leveling electrical extenders

Wall Plate Spacer 10 Pcs Metal Flush Fit Device Leveling Plates

10 Pcs Wall Plate Spacer,Spacers for Electrical Outlets, Metal Flush Fit Device Leveling Plates for Electrical Outlet Repair, Fix Loose Outlets and Electrical Boxes

10 Pcs Wall Plate Spacer,Spacers for Electrical Outlets, Metal Flush Fit Device Leveling Plates for Electrical Outlet Repair, Fix Loose Outlets and Electrical Boxes

View on Amazon

Best for: Loose outlets and electrical boxes that sit slightly recessed or proud of the wall.

This suits homeowners who want a simple, multi-pack set to level several outlets during one repair session.

Pros

  • Pack of 10 covers several outlets at once.
  • Metal construction is firm under a cover plate.

Cons

  • Thinner stacks may not close a large gap alone.

View on Amazon

Metal Wall Plate Spacer 10 Pcs Flush Fit Outlet Shim

Heavy-Duty Metal Finish & Wide-Perimeter Metal Support, suitable for a variety of household switches and outlets 10 Pcs Metal Wall Plate Spacer, Flush Fit Outlet Shim & Device Leveler

Heavy-Duty Metal Finish & Wide-Perimeter Metal Support, suitable for a variety of household switches and outlets 10 Pcs Metal Wall Plate Spacer, Flush Fit Outlet Shim & Device Leveler

View on Amazon

Best for: Heavy-duty support where a switch or outlet feels soft or flexes under the cover.

Owners dealing with older, flexing boxes often look for a wide metal perimeter that spreads load across the plate.

Pros

  • Wide-perimeter metal support resists flexing.
  • Works with a variety of household switches and outlets.

Cons

  • Metal edges need care to avoid scratching the wall finish.

View on Amazon

Outlet Spacer Flush Fit Device Leveling Plates For Wall Outlet Repair

Outlet Spacer,Flush Fit Device Leveling Plates For Wall Outlet Repair And Loose Electric outlets Fix,Self-Leveling Electrical Socket Extenders for Electrical Box and Switches

Outlet Spacer,Flush Fit Device Leveling Plates For Wall Outlet Repair And Loose Electric outlets Fix,Self-Leveling Electrical Socket Extenders for Electrical Box and Switches

View on Amazon

Best for: Electrical boxes that sit at an angle or unevenly inside the wall opening.

This fits anyone whose outlet tilts or whose box sits deeper on one side than the other.

Pros

  • Self-leveling design helps correct tilt.
  • Works for outlet repair and switch boxes alike.

Cons

  • Fit can take a few tries on very irregular boxes.

View on Amazon

Buying Guide

Measure the gap first

Measure how far the cover sits from the drywall, usually in fractions of a millimeter to a few millimeters. Stack spacers until the cover sits flat against the finished surface without pinching.

Check the box material and condition

Metal boxes hold a spacer firmly, while plastic boxes may need a longer mounting screw. Loose or cracked boxes should be secured or replaced rather than shimmed.

Match the spacer to the wall type

Drywall and plaster walls behave differently under screw pressure, so tighten gently to avoid cracking the surrounding finish. Thicker walls may also need longer screws, as covered in 7 Best Longer Screws for Outlet Covers for Thick Walls (2026).

Consider the cover style

Decorative or thick covers may need more clearance than standard plates. If you are choosing a new finish, compare options in 6 Best Wall Plates Outlet Covers for Toddler-Safe Homes (2026).

Good picks for this: Wall Plate Spacer 10 Pcs and Metal Wall Plate Spacer 10 Pcs

FAQ

Can I stack more than one spacer?

Yes, stacking is common when the gap is wide. Keep the total stack thin enough that the mounting screws still reach the box threads.

Do I need to turn off power first?

Yes. Shut off the circuit at the breaker and confirm it is dead with a tester before removing any cover or touching wiring. If you are unsure, consult a licensed electrician.

Is a spacer better than replacing the box?

A spacer works when the box is sound but sits too deep or tilted. A cracked, rusted, or loose box should be replaced by a qualified professional.

Conclusion

For general loose outlets, the 10-piece flush-fit set is a practical starting point. Choose the metal heavy-duty spacer when the outlet flexes, and the self-leveling plates when the box sits at an angle.

Sources

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our childproofing guides, checking product details against manufacturer specifications and owner feedback.