Updated November 2026

Baby proofing kitchen drawers means stopping a curious toddler from pulling out knives, graters, cleaning products and other hazards that can cause cuts, pinches or poisoning. In this guide you will sort what goes where, identify the drawers that need locks, and install the right type of latch on each one. The whole process takes an afternoon for a typical kitchen.

Step 1: Sort the Drawers by Risk

Before buying anything, empty each drawer and sort its contents into three groups. Store sharp tools, batteries, medications and cleaning supplies separately, and keep them out of reach entirely. Anything that is safe for a toddler to handle, such as plastic containers or dish towels, can stay in drawers that are not locked. This sorting step tells you how many locks you actually need, which is often fewer than people expect.

Shopping for one? See our guide: 5 Best Buy Buy Baby Child Proofing Products for Cabinets and Drawers (2026).

Step 2: Choose the Right Lock for Each Drawer Type

Not every drawer works with the same hardware. Under-drawer or inside-drawer locks suit most cabinet fronts, while magnetic locks work well on flush or inset drawers where a hooked latch would be visible or would not fit. Knife drawers and drawers holding cleaning products should get the strongest lock you can install, because a determined toddler can open a basic latch with enough pulling. Plan on one lock per drawer that holds anything hazardous.

Step 3: Install Locks Correctly

Clean the surfaces with rubbing alcohol before applying adhesive, and let them dry fully. Follow the spacing instructions the manufacturer gives for your drawer size, and test the lock by pulling hard before you consider it done. Most adhesive locks need several hours to bond, so avoid testing them right away. For screw-in models, pre-drill pilot holes to prevent splitting, especially in softwood or thin laminate.

Step 4: Check the Drawers Every Few Weeks

Adhesive can loosen with heat, humidity and repeated pulling, and screws can back out over time. Walk through the kitchen once a month and tug each lock. Replace any that feel loose before a toddler finds the weak point. Also check that pull-out drawers still stop short of tipping forward, since a drawer that comes out fully can land on a child.

Quick Checklist

  1. Empty and sort every drawer by hazard level.
  2. List which drawers need a lock and which can stay open.
  3. Buy locks matched to your drawer style (inside, under, or magnetic).
  4. Clean surfaces and let them dry before adhering anything.
  5. Install, then test each lock with a firm pull.
  6. Set a monthly reminder to recheck all locks.

Common Mistakes

  • Locking only the knife drawer and forgetting the drawer holding cleaning sponges and cloths.
  • Keeping hazardous items in unlocked lower drawers within a toddler’s reach.
  • Testing an adhesive lock before it has fully cured.
  • Assuming a lock is secure without checking it after the first week.
  • Forgetting that a dishwasher door or the drawers beside it can also be pulled open.
  • Magnetic cabinet lock kit: Useful for flush or inset drawers, since the latch sits out of sight and does not require a hook. View on Amazon
  • Inside-drawer safety latch: Mounts inside the cabinet and suits drawers where you want a clean outer face. View on Amazon
  • Drawer stopper: Prevents full extraction of pull-out drawers, reducing tip-over risk. View on Amazon

For more detail on specific lock types, see Drawer Locks Baby Proofing: 6 Steps to Secure Every Drawer, and compare options in 5 Best Drawer Baby Proofings: Best Locks Compared for Toddler Homes (2026). If you are also securing the cooktop, Stove Guard Baby Proofing: A Step-by-Step Guide for Safer Kitchens covers that separately.

FAQ

Do I need to lock every drawer in the kitchen?

No. Lock only drawers that hold knives, cleaning products, medications, batteries or other hazards. Drawers with plastic containers or dish towels can usually stay open.

Are adhesive drawer locks safe to use?

Adhesive locks are widely used when installed on clean, dry surfaces and allowed to cure. Check them regularly, and consult the manufacturer’s instructions for weight limits and surface compatibility.

When should I replace a drawer lock?

Replace any lock that feels loose, has a cracked housing, or no longer engages fully. Recheck all locks monthly, since wear can happen gradually.

Conclusion

Sorting your drawers by hazard, choosing the right lock for each style, and checking them regularly will cover most of the risk. Start with the knife drawer and any drawer holding cleaning supplies, then work outward. A few minutes of checking each month keeps the setup reliable as your toddler grows.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our childproofing guides, checking product details against manufacturer specifications and owner feedback.