Updated November 2026

Furniture wall anchors are the simplest way to keep a dresser, bookcase or TV from tipping onto a toddler. Lowe’s stocks several anchor types, from strap kits that screw into studs to adhesive and no-drill options for renters. This guide explains how to pick the right furniture wall anchors Lowe’s carries for your walls and furniture, and how to install them so they actually hold.

Choose the Right Anchor for Your Wall and Furniture

Start by identifying your wall type. Knock on the wall: a solid, dull sound usually means wood studs or masonry, while a hollow sound means drywall. Studs are the strongest mounting point, so a stud-mounted strap is the best choice when you can find one. Use a stud finder to locate studs, typically spaced 16 inches apart on center in most US homes.

Shopping for one? See our guide: 7 Best IKEA Furniture Wall Anchors for Baby Proofing (2026).

If you cannot hit a stud, use a toggle or hollow-wall anchor rated for the furniture weight, or consider an adhesive or no-drill system. Check the rating on the package and make sure it exceeds the combined weight of the furniture plus anything stored on it. Manufacturers generally specify a maximum load per anchor, and you should follow that number rather than estimates.

Install Stud-Mounted Furniture Wall Anchors Step by Step

Stud-mounted straps are the most common option for dressers and TVs. Work through these steps in order:

  1. Locate the stud with a stud finder and mark its center with painter’s tape.
  2. Position the furniture against the wall and mark where the anchor strap will reach.
  3. Drill a pilot hole slightly smaller than the screw, angled slightly upward if the manufacturer recommends it.
  4. Drive the lag screw into the stud until the strap sits flat against the wall.
  5. Attach the other end of the strap to the back of the furniture using the included screws, keeping the strap taut without bowing it.
  6. Pull firmly on the furniture to test that it does not shift or lift.

For a deeper walkthrough on this method, see Wall Anchors for Furniture: A Step-by-Step Guide for Toddler Homes and Heavy Duty Furniture Anchors: How to Secure Dressers and TVs (Step-by-Step).

Use No-Drill and Adhesive Options in Rentals

If you rent and cannot put holes in the wall, no-drill and adhesive systems are the practical alternative. Adhesive anchors bond to the wall and furniture with a strap or cable, and many owners report they work best on smooth, clean surfaces. Clean the wall with rubbing alcohol and let it dry completely before applying the adhesive. Most manufacturers also specify a cure time, so keep the furniture off the strap until the bond has set.

Renters should compare these choices carefully, since adhesive bonds can damage paint when removed. Furniture Anchors No Drill: 6 Renter-Friendly Ways to Stop Tip-Overs covers the trade-offs in more detail, and Adhesive Furniture Wall Anchors: A Step-by-Step Guide for Toddler-Safe Rooms explains how to apply them correctly.

Check and Maintain Your Anchors Over Time

An anchor is only as good as its last check. Inspect straps and screws every few months, especially after moving furniture or when a child begins climbing. Tighten loose screws, replace any strap that is frayed or bent, and confirm the anchor still sits flat against the wall. Toddlers test everything, so do not assume a mount that worked last year is still secure.

  • A stud finder helps you locate framing before you drill, which is the single biggest factor in anchor strength. View on Amazon
  • A quality drill with bits sized for lag screws makes pilot holes and driving screws far easier. View on Amazon
  • Furniture anchor strap kits give you the strap, screws and hardware in one package. View on Amazon

Common mistakes

  • Mounting only into drywall with plastic anchors, which can pull out under a climbing child.
  • Skipping the stud finder and guessing where the framing sits.
  • Leaving straps slack, which lets furniture tip before the anchor engages.
  • Ignoring the weight rating and loading heavy items on top of a dresser.
  • Using adhesive on dusty or painted surfaces that have not been cleaned.

FAQ

Do furniture wall anchors from Lowe’s work on drywall?

Yes, but only if you use a hollow-wall or toggle-style anchor rated for the load. Stud-mounted straps are stronger, so use them whenever a stud is within reach.

Can I install furniture anchors without drilling?

Adhesive and no-drill systems are available and suit renters. They depend on clean, smooth surfaces and may be less secure than stud mounting, so check the weight rating.

How often should I check furniture anchors?

Inspect them every few months and after moving furniture. Tighten screws and replace any damaged straps right away.

Conclusion

Choosing the right furniture wall anchors from Lowe’s comes down to your wall type, your furniture weight and whether you can drill. Stud-mounted straps offer the strongest hold, while no-drill options suit rentals when used on clean surfaces. Consult a professional installer if your walls are unusual or you are unsure about load capacity.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our childproofing guides, checking product details against manufacturer specifications and owner feedback.