Updated November 2026

Metal outlet covers can be safe for toddlers, but only if they are the right type and installed correctly. A well-fitted metal cover blocks access to the slots and prongs, stays secure when a curious child pulls on it, and does not crack the way cheap plastic sometimes does. This guide explains what to look for, how to check an existing cover, and where metal covers fall short.

Why Metal Covers Can Be a Good Choice

Metal covers are sturdier than most plastic ones. They are less likely to crack, chip, or warp over time, and a toddler is unlikely to break one apart with hands or teeth. Many metal covers also use a single screw-in plate that keeps the plug-in slots fully covered even when nothing is plugged in.

Shopping for one? See our guide: 7 Best White Metal Outlet Covers for Toddler-Safe Homes (2026).

The main concern with metal is conductivity. A metal cover must be grounded, meaning it connects to the ground wire in the outlet box, or it must be a non-conductive design with a metal look. An ungrounded metal plate sitting on a live outlet can create a shock hazard if a wire inside the box touches it.

How to Check Whether Your Metal Cover Is Safe

  1. Turn off power to the outlet at the breaker and confirm it is dead with a voltage tester.
  2. Remove the cover and look at the bracket or screw holes. A grounded metal plate usually has a green grounding screw or a bonding tab that touches the metal box.
  3. Check that the cover sits flat against the wall with no gap around the edges. A gap lets a child push a finger or object into the slots.
  4. Make sure the cover uses screws long enough to hold it firmly, and that none are missing or stripped.
  5. Restore power and test the outlet with a plug-in tester to confirm it is wired correctly.

Metal Versus Other Materials

Metal and plastic each have trade-offs, and the right choice depends on your outlets and your child’s habits. The table below summarizes the main differences.

Feature Metal Plastic
Durability Resists cracking and bending Can crack if dropped or chewed
Electrical grounding Must be grounded to be safe Non-conductive by design
Installation Needs correct grounding hardware Usually simpler to fit
Appearance Blends with many wall finishes Wide color range

If your home has older wiring, have a licensed electrician confirm the box is grounded before you install any metal plate. For more on cover materials, see Are Plastic Outlet Covers Safe for Toddler Homes? What to Know and Are Outlet Covers Safe for Toddlers? What Works and What Doesn't.

Installing a Metal Cover Safely

Once you know the outlet is grounded, install the cover with the same care you would use for any electrical work. Keep the power off, tighten screws until the plate sits flush, and avoid overtightening, which can bend the plate and expose the slots. Use the screws supplied with the cover or matching replacements of the correct length. Tamper-resistant designs add another layer of protection, and you can compare options in 7 Best Tamper Resistant Outlet Covers for Toddler-Safe Homes.

If you are unsure about any step, consult a licensed electrician. Wiring mistakes can cause fires or shock.

Common Mistakes

  • Installing an ungrounded metal cover on a box with no ground wire.
  • Leaving a gap between the plate and the wall where a finger can reach the slots.
  • Using screws that are too short or too long for the box.
  • Assuming a cover is childproof when the outlet is still exposed through a loose or bent plate.
  • Skipping a check after painting or moving furniture, which can loosen the plate.

A non-contact voltage tester lets you confirm an outlet is dead before you remove a cover. Look for one labeled for household use.

View on Amazon

A plug-in outlet tester shows whether the outlet is wired correctly and grounded, which is essential before trusting a metal plate.

View on Amazon

FAQ

Can a metal outlet cover shock a child?

Yes, if it is not grounded and a wire inside the box touches it. A properly grounded metal cover avoids this risk.

Are metal covers better than plastic for toddlers?

Metal is more durable, but plastic is non-conductive and simpler to install. Either can be safe when fitted correctly.

How do I know if my outlet box is grounded?

Look for a ground wire, usually bare copper or green, connected to the box or outlet. If you cannot confirm it, ask a licensed electrician to check.

Conclusion

Metal outlet covers are safe for toddlers when they are grounded, fit flush, and are secured with the correct screws. Check your existing covers for gaps and loose hardware, and test the outlet after any change. When wiring is uncertain, a licensed electrician should handle the installation.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our childproofing guides, checking product details against manufacturer specifications and owner feedback.