Updated November 2026

Types of outlet covers fall into a handful of groups, and each one blocks a toddler’s access to the slots in a different way. This guide walks you through the main styles, how they work, and how to match one to the outlets in your home. By the end, you will know which type fits each room and which ones to avoid.

Start With the Basic Plug-In Covers

The most common types of outlet covers are simple plastic plugs that fill the receptacle’s slots. They are inexpensive, easy to find, and quick to install. Their main weakness is that a determined child can sometimes pull them out, especially the smaller versions, so they work best as a first layer of protection in low-traffic areas. Check that the cover sits flush with the faceplate and does not wobble.

Shopping for one? See our guide: 7 Best Floor Plate Outlet Covers for Every Floor Type (2026).

Compare Sliding and Shutter Covers

Sliding and shutter covers add a physical barrier that stays closed until a plug is inserted. Many designs use spring-loaded shutters that open only when both prongs push in at the same time, which makes them harder for a toddler to defeat with a single object. They are a good match for outlets that are used often, such as those near a kitchen counter or a bedside table.

  • Look for shutters that stay closed when nothing is plugged in.
  • Confirm the cover fits your faceplate style before buying.
  • Test the shutter by pushing a thin object into one slot; it should not open.

Choose Tamper-Resistant and Locking Options

Tamper-resistant outlets (TR outlets) are built with internal shutters and are required in most newly built US homes under the National Electrical Code. If your outlets are already TR-rated, you may not need an extra cover at all. Locking covers use a key or a sliding latch to hold the faceplate in place and prevent removal. These suit high-risk spots like outlets behind furniture or in a playroom. Verify your existing outlets before adding covers, and consult a licensed electrician if you are unsure what you have.

Consider Specialty and Weatherproof Types

Specialty covers serve purposes beyond basic blocking. Weatherproof covers have a hinged, gasketed lid that shields the outlet from rain and snow, and they are meant for outdoor and garage walls. Some covers also combine a childproof shutter with a cosmetic finish or a USB port. Pick a specialty type only when the location calls for it, because a weatherproof cover indoors adds bulk without extra benefit.

Quick Checklist for Choosing a Type

  1. Count the outlets in each room and note which are used daily.
  2. Check whether the outlets are already tamper-resistant.
  3. Decide whether the location is indoor, outdoor, or damp.
  4. Match the cover to the faceplate size and style.
  5. Test each installed cover by trying to pull it off and inserting a thin object.

Common Mistakes

  • Using only plug-in covers in areas a toddler can reach easily.
  • Leaving a cover out of a plugged-in outlet and assuming it is still protected.
  • Buying a locking cover without checking that the screws fit your wall plate.
  • Forgetting outlets behind furniture, where covers are hard to see.

FAQ

What is the safest type of outlet cover?

Sliding shutter covers and tamper-resistant outlets offer the strongest protection for toddlers, because the openings stay closed until a plug is fully inserted. Plug-in covers are a reasonable backup but can be removed more easily.

Do I need outlet covers if my outlets are tamper-resistant?

Usually not, since TR outlets already block foreign objects from entering the slots. Confirm the outlet is labeled tamper-resistant before skipping covers, and consult a licensed electrician if you are unsure.

Can I use weatherproof covers indoors?

You can, but they are designed for outdoor use and add unnecessary bulk indoors. Standard shutter or locking covers are better suited to most interior walls.

Conclusion

The right type of outlet cover depends on where the outlet sits, how often it is used, and whether it is already tamper-resistant. Start with a shutter or locking style for high-traffic spots and reserve specialty covers for damp or outdoor walls. Test each cover after installation, and recheck it regularly as your toddler grows.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our childproofing guides, checking product details against manufacturer specifications and owner feedback.